Logo
Kalinsky Sensor Elektronik
Pressure Sensor TechnicsProductsServiceContact
DS1 / DS2DS1 / DS2DMU2/DMU4DS1 / DS2HMGDS1 / DS2DMG3DS1 / DS2DADS1 / DS2DMG5DS1 / DS2DS1 / DS2




    Pressure Transmitters • Series DS1/DS2
Webshop www.drucksensorik.org

Description:
The pressure transmitters of the series DS1-010 and DS1-420 is for using in air and non aggressive gases. They measure difference- and absolute pressure, relative pressure and optionally velocity of flow. The analog output signal is 0-10 V or 4-20 mA or 0-10 kHz. The 4-20 mA pressure transmitter is realised in two wire technic. For measurement of velocity of flow its possible to order the square root output. Because of the piezoresistive cell DS1 reach a high reliability and precision. The dependence of zero signal from mounting position is very small. The resistance against overpressure is higher than by using other physical principles. The transmitters are housed in a robust aluminium package. This guarantees good EMC-properties. Optionally DS1 can be completed with electronic signal damping, power supply 24VAC or 230 VAC.

For applications with higher pressure ranges we offer additionally to DS1 the type DS2.

Measurement ranges:
  DS1   0-0,25 mbar (25 Pa) in steps up to 0-2 mbar (200 Pa)
  DS2   0-2.5 mbar (250 Pa) in steps up to 0-10 bar (1000 kPa)

Medium:
  air and non aggresive gases

Applications:
  control of airblowers
  supervsion of airfilters
  level monitoring of liquids
  monitoring of air flows
 
pressure control and regulation in cleanrooms
 
medical engineering

Order keys:
  DS1-010 with output 0-10 V
  DS1-420 with output 4-20 mA
  DS2-010 with output 0-10 V
  DS2-420 with output 4-20 mA

Datasheet     Datasheet

   
       
     
       
       
     
       
         
TopHomeAbout us
© 2023 Kalinsky Sensor Elektronik GmbH & Co.KG